back to : SAMWAY C401 hose cutter
Cutting a hose with the SAMWAY C401 cutter
Hose DN10 2SN - cutting a hose with two steel braids
Cutting a hose with the C401 cutter
Hose DN25 4 SP - cutting a hose with four steel braids
The full version of the manual is supplied with the cutter
C401 hydraulic hose cutter user manual - content summary
The C401 cutter is a professional device for cutting hydraulic hoses, which is ideal for workshops and service vehicles. To ensure safe and efficient operation, it is necessary to read the following manual and follow health and safety regulations.
1. Introduction
The manual contains detailed information on operating the cutter, from transport and storage to maintenance and safety. It is intended exclusively for qualified users.
2. Transport and Storage
- The cutter is delivered on a pallet and should be checked for damage after unpacking.
- Transport to the workplace can be done by forklift or pallet truck.
- For storage, the device should be protected against bad weather conditions.
3. Equipment and Scope of Delivery
The cutter is ready for use and includes:
- Cutting blade with a diameter of 250 mm,
- Two support brackets,
- User manual and declaration of conformity.
4. Safety
4.1 Protective measures
Operators should use:
- Shoes, safety glasses, earmuffs, gloves, and protective clothing.
4.2 Risks associated with use
Risks related to rotating machine parts, flying debris, and hearing damage in the absence of protection may occur during operation.
4.3 Precautions
Before starting work:
- Ensure that the cutting blade rotates in the direction indicated on the housing.
- Use support brackets when cutting.
5. Intended use
The C401 cutter is designed for cutting hoses with one or two steel braids up to 2". Cutting other materials may cause damage to the device and serious injuries.
6. Cutter Operation
6.1 Identification
Each cutter has an identification plate with the model name, serial number, and year of production.
6.2 Control panel
The cutter is equipped with an emergency stop button and a start/stop switch.
6.3 Installation
- The cutter should be mounted on a stable surface and secured with anchors of at least 8 mm.
- Ensure a minimum space of 1 m around the device and good lighting of the workplace.
7. Start-up and Cutting
7.1 Commissioning
Before starting work, check if the blade is correctly fixed and the emergency switch is in the „off” position.
7.2 Cutting tips
To extend the life of the cutting blade, the first 20 cuts should be performed slowly, avoiding overheating and motor overload. Minimum lengths of sections to be cut vary depending on the hose diameter:
- 250 mm for diameters 3/16”–1/2”,
- 350 mm for 5/8”–1”,
- 500 mm for 1 1/4”–2”.
8. Maintenance
- After each working day, turn off the device, clean off waste, and check the condition of the blade and electrical connections.
9. Technical Data
- Max. hose diameter: 60 mm,
- Motor power: 2,2 kW (230V) or 3,0 kW (400V),
- Speed: 2880 rpm,
- Blade diameter: 250 mm,
- Dimensions: 780 mm x 550 mm x 1100 mm,
- Weight: 105 kg.
10. Warranty
The cutter is covered by a one-year warranty, which is valid provided that the recommendations in the manual are followed.