back to : FAQ - troubleshooting
Also check : gradual wear of consumables
Cutting blade damage in the cutting machine
All offered by us hose cutting blades are designed for professional hose cutting machines. We offer only original SAMWAY, UNIFLEX etc. cutting blades. All cutting blades are X-ray scanned which catches all types of damage and material defects. We do not use cheap substitutes !. We use cutting blades ourselves and know exactly how to handle them.
Tips for using the cutting blade
In order for the blade to fulfill its task, we must follow certain general rules.
- do not overheat the cutting blade
Continuous cutting of hoses without break can cause overheating of the cutting blade and its damage. How to extend the life of the cutting blade : The first 10 cuts with a new blade should be performed very slowly and carefully. After the first ten cuts you can cut faster but do not overload the motor. Do not overheat the cutting blade.
- support pins should be used in the cutting machine
A very important thing in the case of cutting larger hoses. Customers forget how important it is to use support pins, which cause a special bending of the hoses so that it can be cut without obstacles. Lack of support pins causes the blade to overheat or be damaged.


- you should familiarize yourself with the cutting machine user manual
Detailed information on the use of support pins etc. can be found in the operating instructions attached to the cutting machine. Before proceeding with cutting, it is essential to read the instructions.
- check the cutting machine's rotation speed
To cut properly, cutting machines should have rotations in the range of 2800-3500 revolutions per minute. Such rotations guarantee a correct cut - the hose will be cut correctly and not frayed. Lack of required rotations and too high rotations can cause damage to the cutting blade.
- special care should be taken with 4SP, 4SH hoses
Special care should be applied when cutting multi-braid hoses such as 4SP, 4SH hoses, which consist of 4 layers of metal braids ! To protect the blade from damage, we must cut these hoses really carefully and slowly. Most often we can damage cutting blades by cutting multi-braid hoses too fast > we overheat the blade or break it because metal meets metal too quickly.
If we do not follow the above rules, we will cause damage to the cutting blade, which sooner or later will lead to its destruction ( pęknięcie and minor damage will cause irreversible damage to the blade over time. The most common cause of cutting blade damage is too fast cutting of hydraulic hoses !
- The warranty does not cover mechanical damage to the cutting blade
- The warranty does not cover normal wear of the cutting blade (the more we cut, the faster we wear it out, just like with car tires > the more we drive, the faster we wear it out)
This is what a damaged cutting blade looks like :

