Rules for skiving 4SP and 4SH hoses ( four-wire spiral hoses)

We skive four-wire spiral hoses externally and internally. During skiving, remember to hold the hose firmly with both hands during the cutting process. After measuring the hose, select the appropriate pin or cutting blade. It should be noted that after placing the hose on a pin matching its diameter, we skive the outer layer using the motor's left rotation. Right rotation is used when skiving the hose internally to seat the fitting. When starting to skive the hose externally, ensure that after the ferrule is seated and crimped, the skiving is not visible at the back of the ferrule. If the hose is skived too much, apply the rule of pressing the ferrule more firmly onto the hose.
External skiving of 4SP hose
Advice: Select the appropriate pin that will fit the internal diameter of the hose. Next, seat the pin in the skiving machine holder, tightening the screw with the holder knob.
Internal skiving of 4SP hose
Advice: When skiving the hose internally, install a pin with a blade in the skiving machine, matching the blade to the hose.