Skip to main content


Fluid power hydraulics - parts, accesories

Experienced Polish manufacturer & direct distributor of hydraulic components   
Retail & Wholesale – One-Stop Industrial Supplier | 100% European-owned    
   

six-time winner
Business Gazelles 2024

NATO supplier
Code 99Q4H
HYDRON NCAGE code

proven reliability
HYDRON DUNS number

authorized
service
Authorized ENERPAC Service Center in Poland

official
distributorUSA
Authorized ENERPAC distributor in Poland

official distributorEU SEMPERIT distributor

quality assurance
ISO 9001, TUV
HYDRON ISO certificates

📦 15,000+ items in our stock & ready to ship
⚡ Fast shipping 🛡️ Quality guarantee 🛠️ Technical support
Products in the cart: 0. See details
Your cart is empty

Instruction manual for the P32X battery-powered crimping machine

back to : SAMWAY P32X battery-powered crimping machine

Instruction manual for the battery-powered SAMWAY P32X crimping machine 

Remember : When buying this machine from us, you receive free transport and training 

Battery-powered crimping machine

The P32X crimping machine is a mobile machine powered by a 12V battery. It is recommended that the battery be in the range of 100 to 120 Ah. In practice, after a day of crimping hoses, the battery should be connected to a charger to be able to continue working the next day. 

Checking the crimping diameter 

Tip: Crimping a DN10 2SN hose with a P32Q crimper Tip: During the first crimp, you must know what kind of hose it is. Hoses have markings for their parameters. If you cannot read the values on the hose, first measure the inner diameter of the hose with a caliper. Next, visually determine how many steel reinforcements, so-called braids, it has inside. Then select the appropriate ferrule and hose fitting. Next, check the approximate crimping table for the dimension the hose should be crimped to. Example: DN 10 mm ( 3/8 inch) 2SN - double-braid hose. Knowing the hose parameters, we look for the value to crimp the hose to in the approximate crimping table. For a DN 10 2SN hose, the table shows a value of 20,6 mm.

Selection and installation of crimping dies 

Next, we select the dies closest to the 20,6 mm parameter, using the rule that the die size must be smaller than the value of 20,6 mm. In this case, these are 19 mm dies. Next, using simple math, i.e. 20,6 mm - 19 mm = 1,6 mm. The difference after subtracting these values gives us the parameter to set on the micrometer, which in this case is 1,6 mm. After fitting the number 19 dies, we proceed to set the value of 1,6 mm on the micrometer. Use the micrometer dial to set the desired value. The micrometer should be zeroed before setting. Zeroing consists of setting the dial in a position where the digit 0 aligns with the digit 0. By turning the micrometer dial clockwise, we set 1,6 mm and proceed to crimp the hose. The upper digit on the micrometer will indicate 1, while the lower digit on the dial will be 60. Remember to crimp the ferrule on the hose twice. During the first crimp, a ridge forms on the ferrule, which must be smoothed out by a second crimp. This action is performed by rotating the ferrule on the hose so that the dies press down on the ridge formed in that spot. 

Also check : hydraulic hose crimping manual ( extended )