Oil under the crimper head - oil leak from the crimper head
Question : For a few days we have noticed leaks. It is not clear where it is leaking from, and there are no cracks in the housing. It looks like the oil is coming from inside the head.
Answer : Collection of
hydraulic oil under the head
of the crimper is natural. Some manufacturers use adapters, i.e., a connection from under the crimper head to
the oil tank. A leak from under the head is a natural consequence of normal operation - the gradual wear and tear of
crimper seals > the more worn the seals are, the larger the leak will be. In every crimper, oil collects in the same place ( it drips from a special notch in the head ) As long as it leaks to a moderate degree, there is no need to change the seals - it is recommended to replace them only when we are dealing with large oil losses. In the case of a small leak, you can place a small container underneath and drain the oil after a week.
IMPORTANT ! It should be remembered that hydraulic cylinders have hydraulic seals inside that undergo gradual wear - this happens in every device / cylinder. The more the cylinder works / the more load the cylinders are subjected to, the greater the wear of the seals. Seals wear out just like, for example, tires in cars ( the more you drive, the more they wear out )
Minor leaks from under the seals
These minor leaks do not affect the operation of the crimper, which means that you can still crimp normally. In the case of such small leaks, replacing the seals is not recommended. We have additional sets of seals for all cylinders - we recommend replacing the seals after a few years when the leak is really heavy. TO REMEMBER : SEALS ARE WEAR PARTS NOT SUBJECT TO WARRANTY, JUST LIKE TIRES IN A CAR