back to : hydraulic hoses
Selecting a hydraulic hose

photo showing what a complete crimped hydraulic hose with a fitting looks like
What is a hydraulic hose used for ?
Hydraulic hoses are primarily used in hydraulic systems for the transfer of hydraulic oil or other non-aggressive liquid for example water air or other solutions.
Types of hydraulic hoses
In our offer we have all types of hydraulic hoses. Among the basic groups we distinguish hoses with one, two, three, four or six steel braids. Our offer also includes other hydraulic hoses including among others intended for high temperature, hoses for pressure washers, acids bases and other aggressive substances i.e. hoses PTFE. The category of hydraulic hoses i.e. high-pressure hoses ( intended for high pressure ) is really broad and includes hoses for practically all applications.
How to select a hydraulic hose
We make hoses based on a pattern ( original ) or based on the technical information held i.e. : internal diameter of the hose and its parameters such as the number of steel braids. Important technical information about a given hose should be visible on its outer part ( how to read markings on a hose ): the following data should be given there :
- internal diameter of the hose given in mm ( e.g. 10mm ) or inches ( e.g. 3/8" )
- number of steel braids ( 1SN, 2SN, 4SP, 4SH )
- manufacturing standard ( EN853, EN856 )
- working pressure of the hose ( pressure given in MPa, bars or PSI )
- bursting pressure ( bursting pressure is four times higher than the working pressure )
- as well as the production date of the hydraulic hose ( usually the quarter and year of production are given )

A topic that might interest you : criteria for selecting hydraulic hoses
How to crimp a hydraulic hose
To crimp a hose it is necessary to have a hydraulic press i.e. a crimping machine for hydraulic hoses. Hydraulic hoses are characterized by the presence of a steel braid inside the hose - due to this braid it is impossible to clamp onto a GBS clamp. The pressures that occur in hydraulic hoses require that the fitting be connected to the hose using a crimping ferrule - the ferrule must be crimped on a press that has the appropriate crushing force ( the smallest manual crimpers have a pressure of about 90 tons! ) If you do not have a hose crimper you must go to the nearest hose crimping point ( hydraulic line service )
You might also be interested in :
- hose crimping instructions
- instructional videos on hose crimping
- training on operating a crimping press
- types of hose crimping machines
- how to order a complete hydraulic hose assembly
Hydraulic hoses by the meter, crimped hoses
When choosing a hose the most important thing is to select a line with the same or better parameters than the hose we need. The basic parameter of a hose is its working pressure (liquid flow pressure) In our company's offer you will find practically all possible hydraulic hoses and lines ( both for low, medium or high pressure ) We are both a wholesaler as well as a retail store where you can make a purchase of any quantity ( no minimum quantities ) You do not have to order a whole roll of hose - you can order exactly as much as you need ( we will cut the hose free of charge, you can also order a ready complete hydraulic hose assembly.